Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Français

Traduction de l’étape 5

Étape 5
These shots show how the rubber fan gasket should be installed during reassembly. Be sure not to install the gasket underneath the ear where the end of the heatsink is screwed down to the upper case. Additionally, be sure the small post molded into the rubber gasket mates with the hole cut into the upper right corner of the logic board.
  • These shots show how the rubber fan gasket should be installed during reassembly. Be sure not to install the gasket underneath the ear where the end of the heatsink is screwed down to the upper case.

  • Additionally, be sure the small post molded into the rubber gasket mates with the hole cut into the upper right corner of the logic board.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.