iPad Air LTE Logic Board Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Chinois

Étape précédente Étape suivante

Traduction de l’étape 31

Étape 31

iPad Air LTE Logic Board Replacement: étape 0, image 1 de 3

iPad Air LTE Logic Board Replacement: étape 0, image 2 de 3

iPad Air LTE Logic Board Replacement: étape 0, image 3 de 3

Remove the battery isolation pick.
Insert a plastic card underneath the logic board at the battery connector.
Do not use excessive force when inserting this card under the logic board to prevent damaging its battery pins. If the logic board wont budge easily, try reheating the adhesive underneath with an iOpener.
As you push through the adhesive at the outer edge of the logic board, be careful not to damage the upper button assembly ribbon cable that you disconnected in Step 60. Position the card exactly as shown.
Slide the card all the way underneath the logic board, separating the adhesive along the outer edge.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.