Aller au contenu principal

iPad Air LTE Logic Board tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 25

Étape 25
iPad Air LTE Logic Board Replacement: étape 0, image 1 de 1
  • Reheat your iOpener and lay it over the bottom edge of the iPad to soften the adhesive securing the Lightning port ribbon cable to the rear case.

  • Wait a couple minutes for the adhesive to soften, then move on to the next step.

Erwärme nochmals den iOpener und lege ihn an den unteren Rand des iPads, damit der Kleber zwischen dem Flachbandkabel zum Lightning-Anschluss und dem Rückgehäuse weich wird.

Warte ein paar Minuten, bis der Kleber weich ist, fahre dann mit dem nächsten Schritt fort.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.