Aller au contenu principal

Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 25 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 3

Étape 3
Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.
  • Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.

  • In newer model iMacs these are 7.2 mm T8 Torx screws.

  • During reassembly, be careful not to trap the power button wire behind the board.

Retirez les deux vis T10 7,2 mm par lesquelles la carte d'alimentation est fixée au boîtier arrière.

[* red] Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.
[* icon_note] In newer model iMacs these are 7.2 mm T8 Torx screws.
[* icon_reminder] During reassembly, be careful not to trap the power button wire behind the board.
[* red] Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.
[* icon_note] In newer model iMacs these are 7.2 mm T8 Torx screws.
[* icon_reminder] During reassembly, be careful not to trap the power button wire behind the board.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.