Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 30 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1

-
Unplug your iMac's AC cord along with any peripheral devices.
-
Lay your iMac face-down on a soft, clean surface as shown.
-
Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
-
Remove the access door.
[* black] Unplug your iMac's AC cord along with any peripheral devices. |
[* black] Lay your iMac face-down on a soft, clean surface as shown. |
[* icon_caution] Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface. |
[* red] Loosen the three Phillips screws securing the access door to the bottom edge of your iMac. |
[* icon_note] All three screws will remain captive in the access door. |
[* black] Remove the access door. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.