Aller au contenu principal

Öffnungsprozedur

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 25 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 2

Étape 2
Opening Procedure: étape 0, image 1 de 3 Opening Procedure: étape 0, image 2 de 3 Opening Procedure: étape 0, image 3 de 3
  • Apply a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.

  • Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

Platziere mittig einen Saugheber auf der angewärmten Seite.

Achte darauf, dass der Saugheber komplett auf dem Glas aufliegt.

Halte das iPad mit einer Hand nach unten und ziehe den Saugheber mit gleichmäßiger Kraft nach oben, um einen Spalt zu erzeugen.

Je nachdem, wie alt dein Gerät ist, kann das Ablösen schwierig sein. Wenn du Probleme hast, erwärme die Stelle noch einmal und versuche es wieder.

Hebe das Glas nur soweit an, dass du ein Plektrum einführen kannst – je mehr du das Glas öffnest, desto eher kann das Glas Risse bekommen.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.