Aller au contenu principal
Anglais
Français

Traduction de l’étape 13

Étape 13
Hold the new drive in place and attach it to the frame using the four Phillips screws. Plug the interconnect board into the new drive, making sure that all wires are in their original place. Route the black thermal sensor wire back through the notch.
  • Hold the new drive in place and attach it to the frame using the four Phillips screws.

  • Plug the interconnect board into the new drive, making sure that all wires are in their original place.

  • Route the black thermal sensor wire back through the notch.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.