Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Japonais

Traduction de l’étape 4

Étape 4
Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets. Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.
  • Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets.

  • Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.

リボンケーブルを点線に沿って折り曲げて、コネクタがソケットから外れにくくします。

SSDコネクタのところでリボンケーブルを90°折り曲げて、コネクタと平行になるようにします。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.