Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Chinois

Traduction de l’étape 4

Étape 4
Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets. Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.
  • Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets.

  • Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.

沿着虚线弯曲带状电缆,以帮助连接器固定在插座中。

将带状电缆在SSD连接器上弯曲90度,使其与连接器平行。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.