Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 20 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 6

Étape 6
Insert the flat edge of a spudger into the bottom right corner of the device. Twist the spudger to widen the gap between the display assembly and the rear case. Slide the flat end of the spudger up the right side of the phone to break up the adhesive holding the display in place.
  • Insert the flat edge of a spudger into the bottom right corner of the device.

  • Twist the spudger to widen the gap between the display assembly and the rear case.

  • Slide the flat end of the spudger up the right side of the phone to break up the adhesive holding the display in place.

  • Do not insert the spudger further than the adhesive to avoid damaging delicate ribbon cables along the right edge.

将撬棒的头插入设备的右下角。

移动撬棒以扩大屏幕和后壳之间的间隙。

将撬棒的头滑动,从而打开屏幕固定胶。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.