Aller au contenu principal

Öffnen des Geräts

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 2

Étape 2
Opening Procedure: étape 0, image 1 de 2 Opening Procedure: étape 0, image 2 de 2
  • Apply a suction cup to the lower half of the front panel, just above the home button.

  • Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Setze einen Saugnapf auf die untere Hälfte des Displays, knapp über dem Home-Button.

Achte darauf, dass der Saugnapf nicht auf dem Home-Button aufliegt. Dies würde verhindern, dass sich ein Vakuum zwischen dem Saugnapf und dem Glas bildet.

Wenn die Scheibe stark zerbrochen ist, haftet der Saugheber möglicherweise nicht gut. Klebe eine Schicht durchsichtigen Klebebands darüber, dann hält er besser. Du kannst auch sehr starkes Klebeband anstatt eines Saughebers verwenden. Wenn das alles nicht klappt, dann klebe den Saugheber mit Sekundenkleber an der Scheibe fest.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.