拆机步骤

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais

Chinois

Traduction de l’étape 3

Étape 3

Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
Insert the flat end of a spudger into the gap.
The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, rock the screen up and down to weaken the adhesive until you can fit a spudger inside.
While pulling up on the suction cup, twist the spudger to widen the opening between the screen and rear case.

以固定的恒定拉力上拉吸盘，来使得前面板和后壳之间产生轻微的间隙。
将撬起工具的扁端插入间隙。
固定显示器的防水粘合剂非常坚固; 创造这个初始差距需要很大的力量。 如果你很难打开缝隙，上下摇晃屏幕以削弱粘合剂，直到你可以插入撬起工具。
在向上拉起吸盘的同时，旋转撬起工具以加宽屏幕和后壳之间的开口。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.