Philips Sonicare DiamondClean HX9340 Battery Replacement

Anglais

Chinois

Traduction de l’étape 10

Étape 10

Apply flux to the positive contact of the battery on the PCB (Incidental finding is a SMD fuse F1 on this PCB)
Using desoldering braid unsolder the positive contact from the PCB.
Apply some gentle pressure with a small tool to remove the battery.
The battery should remove easily. If it does not, double check the battery contacts on the PCB to ensure they are not still connected somewhere. Another going over with the soldering iron may be required to complete that task.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.