Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Turn the circuit board over and identify which solder connection you will desolder. The solder connections shown in red hold the right antenna port in place. There is one more attachment for this antenna on the other side of the board.
  • Turn the circuit board over and identify which solder connection you will desolder.

  • The solder connections shown in red hold the right antenna port in place. There is one more attachment for this antenna on the other side of the board.

  • The solder connections shown in blue hold the left antenna port in place. Desolder these 4 points to remove the antenna port.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.