Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 13 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2

-
Remove the following 4 screws:
-
Two 3.3 mm silver Phillips screws on either side of the SuperDrive.
-
One 4.7 mm silver T6 Torx screw from the top left corner of the drive.
-
One 6.2 mm black Phillips screw at the top right corner of the drive.
-
Lift the optical drive up and out of the computer.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.