Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Français

Traduction de l’étape 1

Étape 1
Use a screwdriver to remove the seven 3.0 mm Phillips 000  screws that are holding the motherboard in place as shown. Don't lose the washer that is highlighted with an orange marker as shown. It is a necessary component to protect the screw.
  • Use a screwdriver to remove the seven 3.0 mm Phillips 000 screws that are holding the motherboard in place as shown.

  • Don't lose the washer that is highlighted with an orange marker as shown. It is a necessary component to protect the screw.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.