Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Français

Traduction de l’étape 1

Étape 1
Remove the 5 small black screws along the edges of the control panel at the top of the device. Wedge a small flathead screwdriver around the edges of the panel. Loosen the edges of the panel until it pops away from the device.
  • Remove the 5 small black screws along the edges of the control panel at the top of the device.

  • Wedge a small flathead screwdriver around the edges of the panel. Loosen the edges of the panel until it pops away from the device.

  • Locate the blue circuit strip along the underside of the control panel and disconnect it from the inner components of the device.

  • Remove the top control panel from the device after it has been disconnected.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.