Aller au contenu principal
Anglais
Espagnol

Traduction de l’étape 6

Étape 6
Much like the Function Keys model, the trackpad in the Touch Bar unit slides out easily after dispatching ten T5 Torx screws. We can also happily report that the trackpads from these respective models are identical, and likely cross-compatible.
  • Much like the Function Keys model, the trackpad in the Touch Bar unit slides out easily after dispatching ten T5 Torx screws.

  • We can also happily report that the trackpads from these respective models are identical, and likely cross-compatible.

  • The cable routing, however, is different to accomodate the modified logic board design. So, if you're planning on replacing a busted trackpad, be sure to hold on to the original flex.

  • In case you missed it, here are the ICs we identified the first time around:

  • STMicroelectronics STM32F103VB ARM Cortex-M3 MCU

  • Broadcom BCM5976C1KUFBG Touch Controller

  • Maxim Integrated MAX11291ENX 24-Bit, 6-Channel Delta-Sigma ADC

Al igual que el modelo de teclas de función, el trackpad en la unidad Touch Bar se desliza fácilmente después de despachar diez tornillos Torx T5.

También podemos informar felizmente que los trackpads de estos modelos respectivos son idénticos y probablemente compatibles entre sí.

Sin embargo, el enrutamiento del cable es diferente para adaptarse al diseño modificado de la placa lógica. Por lo tanto, si planeas reemplazar un trackpad roto, asegúrate de mantener el cable flexible original.

Por si te lo has perdido, aquí están los circuitos integrados identificados la primera vez:

STMicroelectronics STM32F103VB ARM Cortex-M3 MCU

Controlador táctil Broadcom BCM5976C1KUFBG

Maxim Integrated MAX11291ENX 24-Bit, 6-Channel Delta-Sigma ADC

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.