Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 5

Étape 5
The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board. Lift the logic board assembly out of the front case from the click wheel connector side (the cable you just disconnected).  Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.
  • The logic board is still connected to the front case by the display ribbon cable, located on the headphone jack side of the logic board.

  • Lift the logic board assembly out of the front case from the click wheel connector side (the cable you just disconnected). Rotate the logic board assembly about the display ribbon cable and lay it next to the front case.

La scheda madre è ancora collegata alla copertura anteriore dal cavo a nastro dello schermo, posizionato dal lato della scheda madre dove si trova la presa jack.

Solleva il gruppo della scheda madre dal bordo del connettore della ghiera cliccabile (il cavo che hai appena scollegato). Ruota il gruppo della scheda madre attorno al cavo dello schermo e appoggialo accanto alla copertura anteriore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.