Traduire l'étape #18 - Sony BDV-NF620 Teardown - iFixit

Réparez vos affaires

Droit à la réparation

Boutique

Retourner au tutoriel

Anglais

Japonais

Étape précédente Étape suivante

Traduction de l’étape 18

Étape 18

Remove the four orange PH2 screws.

At the back, remove the two upper PH2 screws.

Rotate the lower edge of the shield and pull it towards you to remove it.

Audio board shield

Remove the four orange PH2 screws.
At the back, remove the two upper PH2 screws.
Rotate the lower edge of the shield and pull it towards you to remove it.
When you reassemble it, pay attention to the plastic over it, as it can move and not protect the base of the power supply.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.