Aller au contenu principal
Anglais
Français

Traduction de l’étape 2

Étape 2
Remove the T8 Torx screw securing the Bluetooth board to the case. Do not attempt to completely remove the board yet, as it is still attached by a cable. Remove the tape wrapped around the Bluetooth board, being careful not to put to much tension on the still connected cable.
  • Remove the T8 Torx screw securing the Bluetooth board to the case.

  • Do not attempt to completely remove the board yet, as it is still attached by a cable.

  • Remove the tape wrapped around the Bluetooth board, being careful not to put to much tension on the still connected cable.

  • Use the flat end of a spudger to pull the Bluetooth data cable out of its connector and remove the Bluetooth board.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.