Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard. Remove the camera by gently pulling upward with a pair of tweezers. Remove the camera by gently pulling upward with a pair of tweezers.
  • Use the flat end of a plastic spudger to pry up the press-fit connector from the motherboard.

  • Remove the camera by gently pulling upward with a pair of tweezers.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.