Aller au contenu principal

Nintendo Switch Teardown

Anglais
Allemand

Traduction de l’étape 19

Étape 19
Nintendo Switch Teardown: étape 0, image 1 de 3 Nintendo Switch Teardown: étape 0, image 2 de 3 Nintendo Switch Teardown: étape 0, image 3 de 3
  • The controllers shed their skin for a close-up comparison. We bring you, Red vs. Blue.

  • We aren't shallow—it's what's inside that counts. The red Joy-Con comes out ahead with IR hardware and an NFC antenna.

  • The IR hardware consists of an IR camera and four IR LEDs. Nintendo says that the camera can detect different hand shapes, distance, and in the future will be able to record video. As for the LEDs, our bet is that they cast IR light onto nearby objects to make them easier to identify.

  • You know what both have though? Two Phillips screws holding the joystick and two Phillips screws holding the board. That's what.

  • Blue, you are there for us repair folk when it counts.

  • On the bottom of each rests a hefty HD Rumble motor weighing in at 5.5 grams.

Die Controller werfen ihre Haut für einen genaueren Vergleich ab. Rot vs. Blau.

Wir sind nicht oberflächlich - nur die inneren Werte zählen. Der rote Joy-Con geht mit der Infrarothardware und der NFC Antenne in Führung.

Die Infrarothardware besteht aus einer Infrarotkamera und vier Infrarot-LEDs. Nintendo sagt, dass die Kamera verschiedene Handformen erkennen und Abstände messen kann, in Zukunft soll sie auch Videos aufnehmen. Was die LEDs betrifft, tippen wir darauf, dass sie Infrotlicht auf nahe Objekte aussenden, um sie leichter identifizieren zu können.

Weißt du, was jedoch beide gemeinsam haben? Zwei Kreuzschlitzschrauben halten die Joysticks und zwei Kreuzschlitzschrauben halten die Platine. Das ist doch was.

Wenns drauf ankommt ist Blau der Richtige für uns Reparateure.

Bei beiden befindet sich unten ein kräftiger HD Rumblemotor mit einem Gewicht von 5,5 g.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.