Aller au contenu principal

Nintendo Switch Teardown

Anglais
Allemand

Traduction de l’étape 21

Étape 21
Nintendo Switch Teardown: étape 0, image 1 de 3 Nintendo Switch Teardown: étape 0, image 2 de 3 Nintendo Switch Teardown: étape 0, image 3 de 3
  • Teardown Update: Just to make sure we were getting our fill of secret sauce, we popped the top off the haptic feedback motor, a linear resonant actuator (LRA) that powers Switch's HD Rumble.

  • These LRAs look very similar to the ones we pulled out of the Oculus Touch controllers, HTC Vive, and the Steam Controller.

  • We took a second to pop open a Oculus Touch haptic motor and it seems to be internally identical to this one.

  • On the inside, this vibration motor seems fairly standard. It's essentially a voicecoil installed in a moving mass assembly, flanked by a pair of powerful magnets.

  • However, it's interesting that this LRA seems to vibrate along its short axis, while many haptic feedback motors that we've seen vibrate along their long axis.

Teardown Update: Wir wollten der Switch die letzten Geheimnisse entreißen und öffneten die Abdeckung des Haptikmotors, einen "Linear Resonant Actuator" (LRA = Linearresonanzaktuator), welcher das HD Rütteln der Switch antreibt.

Diese LRAs sehen ganz ähnlich wie die aus, die wir aus dem Oculus Touch Kontroller, HTC Vive und dem Steam Kontroller herausgeholt haben.

Wir haben schnell noch einen Oculus Touch Haptikmotor geöffnet und er scheint im Inneren identisch wie dieser hier zu sein.

Vom inneren Aufbau her scheint dieser Vibrationsmotor üblicher Standard zu sein. Im Wesentlichen ist das eine Anregungsspule, welche um eine bewegliche Masse, flankiert von zwei starken Magneten, gebaut ist.

Es ist jedoch interessant, dass dieses LRA entlang seiner kurzen Achse zu vibrieren scheint, wohingegen viele der Haptikmotoren, die wir bisher gesehen haben, entlang ihrer langen Achse vibrieren.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.