Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 2
Étape 2
-
Using a tool such as a spudger or plastic opening tool, insert the end into one of the small indentations located on the back of the speaker. Start either on the indentation farthest to the right or to the left.
-
Pry up with the spudger or plastic opening tool so that the cover is pushed up slightly.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.