Aller au contenu principal
Anglais
Espagnol

Traduction de l’étape 27

Étape 27
Slide the metal spudger under the black sticker and carefully work your way around the assembly, avoiding the flex cables. This step is easier than it looks, but only perform this step if the screen or the digitizer needs to be replaced. If both are functional, this step is unnecessary. Thoroughly clean both pieces with alcohol afterwards. Slide the metal spudger under the black sticker and carefully work your way around the assembly, avoiding the flex cables. This step is easier than it looks, but only perform this step if the screen or the digitizer needs to be replaced. If both are functional, this step is unnecessary. Thoroughly clean both pieces with alcohol afterwards. Slide the metal spudger under the black sticker and carefully work your way around the assembly, avoiding the flex cables. This step is easier than it looks, but only perform this step if the screen or the digitizer needs to be replaced. If both are functional, this step is unnecessary. Thoroughly clean both pieces with alcohol afterwards.
Remove digitizer
  • Slide the metal spudger under the black sticker and carefully work your way around the assembly, avoiding the flex cables. This step is easier than it looks, but only perform this step if the screen or the digitizer needs to be replaced. If both are functional, this step is unnecessary. Thoroughly clean both pieces with alcohol afterwards.

Desliza el spudger de metal debajo de la pegatina negra y desliza con cuidado alrededor del ensamble, evita los cables flex. Este paso es más fácil de lo que parece, pero realice este paso si es necesario reemplazar la pantalla o el digitalizador. Si ambos son funcionales, este paso es innecesario. Limpia a fondo ambas piezas con alcohol a después.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.