Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Allemand

Traduction de l’étape 28

Étape 28
This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks. This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks. This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks.
Remove speakers
  • This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks.

Dieser Schritt ist nur notwendig, wenn das obere Display kaputt ist. Leider passiert das oft. Trage Flussmittel auf die Kontakte auf. Dann entlöte alle vier Kabel. Ich empfehle beim Zusammenbau neues Lötzinn.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.