Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Italien

Traduction de l’étape 28

Étape 28
This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks. This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks. This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks.
Remove speakers
  • This step is only necessary if your upper LCD is bad. Unfortunately, this is a common problem. First, wet the contacts with flux. Then, with your iron at 400 degrees C, melt the solder and remove all four wires. It might help to add fresh solder with lead. The lead-free solder used by Nintendo sucks.

Questo passaggio servo solo se il pannello LCD è rotto. Sfortunatamente è un problema comune. Per prima cosa, applica del gel flux sui contatti. Ora scalda la punta di un saldatore a 400° C e dissalda i contatti per scollegare i 4 cavi. Può essere utile aggiungere della saldatura con piombo. Le saldature senza piombo usate da Nintendo sono pessime.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.