Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 9 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 1

Étape 1
Ensure your device is completely OFF before starting this guide.
  • Ensure your device is completely OFF before starting this guide.

  • Use a Torx T4 screwdriver to unscrew the nine 5 mm screws holding the cover in place.

  • Use a Torx T4 screwdriver to unscrew the 8 mm screw in the center.

  • When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

使用T4螺丝刀,拧开固定背板一圈的9颗5mm T4螺丝

使用T4螺丝刀,拧开中间的1颗8mm T4螺丝

组装还原时,请注意不要把螺丝上的太近,否则可能损坏塑料背板

[* icon_caution] Ensure your device is completely OFF before starting this guide.
[*
red] Use a Torx T4 screwdriver to unscrew the 9 5mmnine 5 mm screws holding the cover in place.
[* orange] Use a Torx T4 screwdriver to unscrew the 8mm8 mm screw in the center.
[* icon_caution] Ensure your device is completely OFF before starting this guide.
[*
red] Use a Torx T4 screwdriver to unscrew the 9 5mmnine 5 mm screws holding the cover in place.
[* orange] Use a Torx T4 screwdriver to unscrew the 8mm8 mm screw in the center.
[* icon_reminder] When, reassembling, make sure not to tighten the screws too much or you may risk cracking the plastic cover.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.