Traduire l'étape #9 - HP 250 G3 WiFi Card Replacement - iFixit

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 9

Étape 9

Gently lift the keyboard up.

Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).

Carefully open the lid with a spudger and slide the ribbon cable out of the connector.

removing keyboard / ribbon cable

Gently lift the keyboard up.
Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).
Carefully open the lid with a spudger and slide the ribbon cable out of the connector.
Be very gently with the cable and the connector because the lid may come loose. If this happens, it is difficult to put the cable and the connector back in.
Close the lid again, after removing the cable, so that the cable cannot jump out.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.