Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 2

Étape 2
In the following steps you will be cutting through the adhesive around the edge of the rear glass panel. The adhesive on the rear case is laid out as seen in the first image.
  • In the following steps you will be cutting through the adhesive around the edge of the rear glass panel.

  • The adhesive on the rear case is laid out as seen in the first image.

  • The prying pattern as seen from the outside of the phone is as follows:

  • Thick portions of adhesive

  • Thin areas of adhesive

  • Avoid prying here, to protect the fingerprint sensor.

接下来的步骤中将切割背面玻璃面板边缘下的粘合剂。

后壳上的粘合剂如第一张图像所示。

从手机外面看到的撬动位置如下:

厚的粘合剂部分

较薄粘合剂的部分

为了保护指纹识别传感器,避免撬动这里。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.