Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 3

Étape 3
Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge. The suction cup will not make a good seal on the curved portion of the glass.
  • Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.

  • The suction cup will not make a good seal on the curved portion of the glass.

  • If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift on the suction cup, and insert a halberd spudger, or opening pick, under the rear glass.

  • Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

Wenn sich Rückseite warm anfühlt, setze einen Saugnapf so nahe wie möglich an der erwärmten Kante auf, ohne der abgerundeten Kante zu nahe zu kommen.

An der abgerundeten Kante kann der Saugnapf nicht gut fassen.

Ziehe am Sauger und schiebe einen Spudger oder ein Plektrum unter die rückwärtige Scheibe.

Da die Scheibe abgerundet ist, musst du das Werkzeug eher nach oben drücken, als parallel zur Scheibe einzuschieben.

[* black] Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.
[* icon_note] The suction cup will not make a good seal on the curved portion of the glass.
[* icon_note] If the phone's back cover is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Lift on the suction cup, and insert a halberd spudger, or opening pick, under the rear glass.
[* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.