Aller au contenu principal

Info : Vous modifiez actuellement un pré-requis du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel% qui comprend cette étape.

Traduction de l’étape 2

Étape 2
The lens is held in place by two metal tabs: one located directly under the circuit board between the flash and the lens and the other located between the lens and the speaker. Using a screwdriver, push the metal tab toward the center of the circuit board.
  • The lens is held in place by two metal tabs: one located directly under the circuit board between the flash and the lens and the other located between the lens and the speaker.

  • Using a screwdriver, push the metal tab toward the center of the circuit board.

  • This frees the lens in that corner. However, this step may take some tweaking to properly release the lens.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.