Traduire l'étape #1 - Motorola Atrix 4G Antenna Replacement - iFixit

Annuler

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Français

Étape suivante

Traduction de l’étape 1

Étape 1

Remove the four 5.0 mm T5 Torx screws from the corners of the phone.

Remove three 5.5 mm T5 Torx screws from the back of the phone.

Lift up the black rubber flap near the SD card slot.

Remove the four 5.0 mm T5 Torx screws from the corners of the phone.
Remove three 5.5 mm T5 Torx screws from the back of the phone.
Lift up the black rubber flap near the SD card slot.
Remove the single 5.5 mm T5 Torx screw beneath the flap.
Do not attempt to loosen the screws with too much force. These screws are small, and easily stripped.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.