Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 21 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 3

Étape 3
Disconnect the front panel sensor assembly connector from its socket on the logic board. This press connector should also be reconnected one end at a time to minimize the risk of bending.
  • Disconnect the front panel sensor assembly connector from its socket on the logic board.

  • This press connector should also be reconnected one end at a time to minimize the risk of bending.

Stacca il connettore del gruppo sensore del pannello frontale dal suo zoccolino sulla scheda logica.

Questo connettore a pressione deve essere riconnesso un'estremità alla volta per minimizzare il rischio di piegatura.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.