Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 33 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 2

Étape 2
Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal. Carefully lift the I/O board and remove it from the lower case.
  • Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.

  • On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.

  • Carefully lift the I/O board and remove it from the lower case.

Retira los dos tornillos Torx T5 de 3,1 mm que sujetan la placa de E / S a la placa lógica.

Levanta con cuidado la placa de E / S y retírala de la carcasa inferior.

[* red] Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.
+ [* orange] On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.
[* black] Carefully lift the I/O board and remove it from the lower case.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.