Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 33 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 2

Étape 2
Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal. Carefully lift the I/O board and remove it from the lower case.
  • Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.

  • On some models, also removing the silver 3.5 mm T5 Torx screw from the heatsink can aid in I/O board removal.

  • Carefully lift the I/O board and remove it from the lower case.

Rimuovi le due viti Torx T5 da 3,1 mm che fissano la scheda I/O alla scheda logica.

Su alcuni modelli può aiutare a rimuovere la scheda I/O svitare anche la vite argento Torx T5 da 3,5 mm dal dissipatore.

Solleva con cautela la scheda I/O e rimuovila dal case inferiore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.