Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
Using a screwdriver with a J000 Phillips bit, remove the fourteen 3.175 mm screws.
-
Using a plastic opening tool, pry part of the panel up starting from the sides of the battery slot.
-
Use plastic tweezers to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens; set the back panel off to the side.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.