Smart cover sensors (Hall Effect) too sensitive after new digitizerHello, So I have replace the digitizer on two different iPads now, and both have exhibited the same behavior. After...
Réponse à : « Smart cover sensors (Hall Effect) too sensitive after new digitizer »Hello all! So after playing around much more, and running across this post (Smart Cover Locks iPad Air from Back Side) it seemed that the home button flex cable might be causing the issue. I had my strong doubts since the circuitry on both cables LOOKED (to the naked eye) identical. But to test, I used the button off the old glass, and it worked PERFECT! While there doesn't seem to be any magnets in that cable, there must be some type of logic circuit in there relating to the awake/sleep switch. I have to say, I'm pretty disappointed in ifixit's parts (not their instructions) because of this. I lost so many hours. If a button (or cable) doesn't have full functionality - that's fine... we just need to know! Thanks, Bill Bushong