Les tutoriels auxquels j'ai contribué
Réponse à : « Why is my flash not going off? »There are a few possibilities why your flash may not be going off. The first possibility is that the flash is turned off in the settings. A second possibility is that the flash mechanism is broken. A spring mechanism pops up the flash, and this spring mechanism may be broken or worn out. A third possibility is that there is a problem in the power line to the camera. This problem may be due to a faulty connection to the motherboard. Please follow the Motherboard Replacement Guide to take the camera apart so that you can check the connections. If the flash is still not working after you have checked the connections and camera settings then you may need to replace the flash housing.
Réponse à : « Why aren't my pictures transferring to my computer? »There are a few reasons pictures may not transfer to your computer. If you are trying to transfer the photos by directly plugging in the SD card, two possible reasons are (1) The SD card is not inserted properly in the SD card slot on your computer (2) The SD card contacts are dirty If you are connecting the camera by a USB cable, two possible reasons the pictures are not transferring are (1) The USB cable is not properly connected (2) The connections are blocked by debris Some solutions for the SD card problem are (1) Ensure the SD card is inserted properly. Depending on your reader a portion may still be exposed (2) Clean the SD card contacts by gentle cleaning them with a small amount of rubbing alcohol (3) If you feel that the problem is with the camera not reading the SD card, please refer to the troubleshooting guide Some solutions for the USB cable problem are (1) Ensure the USB cable is plugged in the appropriate port on the camera and on your computer (2) Unplug the USB cable from the computer, and r...