I enjoy working with my hands and seeing the finished product. Helping other people to be a success gives me great personal satisfaction. I can work well on a team or as an individual. I have the ability to resolve customer complaints with empathy and professionalism. I enjoy learning new things and strive to do so, the ability to accomplish my life's goals and to gain the respect of other people comes from seeking to understand, and overcoming my personal limits, also looking for a win-win outcome in all of my business relationships.
Involved in maintaining a Medium sized business network.
Service and repair of Workstations and Servers.
Network support and installation.
Train and support individuals in the use of Microsoft based systems.
Cisco CCENT Certified.
Cisco Id# 419295068637IPYJ
In process of taking my CCNA.
Page 1 de 3
Réponse à : « How do I remove the RAM? »Before removing a memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. To remove the battery: 1. Position the computer upside down on a flat surface. 2. Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery. 3. Remove the battery from the computer (3). 4. Remove the battery and then remove the following components: ● Keyboard : 1. Position the computer upside down with the front toward you. 2. Remove the two Phillips PM2.5×5.0 screws that secure the keyboard to the computer. 3. Position the computer upright with the front toward you. 4. Lift to rotate up the top of the keyboard (1), and then lift the...
Réponse à : « ASUS Laptop boot problems »Hi , We need to first fix the Boot Record then check and fix hard drive errors. 1.Make sure you can boot to your Windows 7 installation usb drive. You have to go in bios to security option then disable USB security so it will be able to boot to USB drive, then go to boot options and add New boot option that will be the USB, then make it boot option 1. 2. Restart the computer with the optical disk or USB drive inserted and boot to it. Press any key when prompted to boot to the Windows USB. 3. At the language and keyboard selection screen press Shift+F10 to open a Command Prompt. You should see X=Sources>, now type bootrec /fixmbr, it will say completed successfully. Stay at the command prompt, now on to the check disk 4. What is usually the system C drive may not be here because if there is a system reserved partition it will occupy C instead. To find out type Dir C: and if it says “C is System Reserved” try Dir D: and so on until you find the drive with Program Files, Users and Windows folders. 5. Now you...
Réponse à : « Possessed Lenovo Tablet Tab3 7Essential »Hello, Try this should work: You will need a Computer , USB Cable & your tablet for this process, if you have these things keep on reading. Flashing Stock ROM on Lenovo Tab3 7 Essential - TB3-710F 1.Download and extract SP Flash Tool (SPFT). 2.Download, extract, and install the Preloader USB VCOM driver (cdc-acm). 3.Download and extract TB3-710F firmware. 4.Run the SPFT, load the scatter file that was included with the firmware download. 5.Make sure that SPFT mode is set to "download only". 6.Remove the checkmarks from the partitions you do not want to overwrite. In your case, first try to only flash the BOOT/BOOTIMG and SYSTEM/ANDROID partitions (remove all checkmarks except for boot and system). 7.Click the SPFT download button. 8.Connect the tablet to the PC via USB. The tablet must be off. If it's running, just shut it down or reboot. 9.As soon as the tablet's boot process begins, the SPFT should find it and begin the flashing process. Once done it should not ask for OLD google account.