Répondre à :My iPhone 5s home button does not click.In my experience, simply loosening the screws a quarter turn will suffice. It all depends on the screen that's being used tough, since you bought it used you'll have to open up and see if the screen is original or not. I have experience with really crappy screens that either sit too tight like in your case or too loose to be pushed beneath the screen. Ben's answer is a good solution to it is as well in the case of a crappy screen, but try loosening the screws a bit before you go bending the plates!
Répondre à :not able to screw the last 2 Pentalobe screws back into iPhone 6sIf you look at the bottom of your screen where the screws attach there's two screw holders attached to the screen. These can sometimes get bent, misaligned or even break off completely, if they're bent or misaligned you can realign them by force, if they're off completely there's nothing short you can do of either supergluing them back or simply adding a light adhesive to the screws themselves.