eric

On my Mini, the 26mm T6 screw and stand-off removed in step 12 goes through the fan and has to be removed in step 3. Not sure if that was a design change mid production.

When reassembling, make sure the short tab is down and the long tab is up. Compare placement with the back panel to make sure it will line up.

Mid 2011. The "yellow screw" from step 14 is captive in the fan and has to be removed in step 4.

Les SSD de 2.5" ont exactement les mêmes dimensions que les disques durs. Choisissez-les plutôt quel les SSD sous forme de barrette.

If you accidentally disconnect the antennas, see Mac mini Model A1283 Antennas Replacement to reconnect them.

To reinstall drive, hold the internal frame upside down. This will make it easier to align the connector.