Page 1 de 3
No 3g signal, what does this the rear wifi port control?I have a customer whose buddy tried to open his 3GS iphone (A1303A) by prying it open at the silver antenna band around...
Buttons not responsive on the top of the Guitar Hero fret board?How do I fix the buttons on the Xbox360 RedOctane Les Paul guitar hero wifi controllers? They often work if I push down...
Does not turn on after inverter replacementHello, I've got a customer who tried to replace his inverter on an A1181 and after it does not turn on. I've opened the...
Réponse à : « replace home button? »I mean that you dont have to remove anything, you can put a dab of solder onto the flex cable and affix the pin back on. Otherwise you will have to heat gun off the digitizer/front glass to remove the home button which could lead to broken glass, torn flex cables, etc..
Réponse à : « replace home button? »It's easier to just solder the pin back on. I've had several of these home button failures brought into my store and just put a slight dab of solder onto the connector from where it came. It's a very simply circuit and I've had 100% success with this method. Make sure its bent up slightly to allow the pressure to connect onto the dock flex cable the activates the home button response. Otherwise you have to fully disassemble the lcd, and heatgun remove the front panel/glass-digitizer and peal out the home button.