Screen blank since stripped out motherboard and left for a few daysHi guys I hope someone can help me I have an iphone 4 and I have just replaced the iPhone 4 Proximity Light Sensor Motion...
Réponse à : « iPhone 3G Glass/Digiter Replacement: Screen Now Black »Thanks Steve, I did what you said but to no avail. Eventually I gave up and a local repair shop charged me £15 to make sure I put it all back together correctly. I had but what i had done was when i unscrewed the power putton on my iPhone 4 i bent the digitizer cable right back instead of folding it in half to get to the screw. This was why the screen was not working. I sorced a new one locally for £25 and it now works fine. So big tip guys........ to unscrew the power botton housing fold the digitizer cable in half, NOT right back on itself. Hope this helps others ! Thanks Rob
Réponse à : « iPhone 3G Glass/Digiter Replacement: Screen Now Black »Guys I have the same problem but can not understand what Steve is asking me to do. I replaced the power button circuitry and now I just get a blank screen with the occasional vibration from it. I have a faint back light though. Which one is the 4 cable and what does he mean but tilt it away from the battery. Do I tack the motherboard completely out again and disconnect all the wires?? I'm ver confused and very fustrated Can someone pleeeease help ? Thanks Rob