Réponse à : « Only front display replacement or full LCD Touch Digitizer Screen? »If you don't heat it up you're going to crack it. Just because you guys can't doesn't mean none can. I repaired countless IPhones and none of which have i broken. They are not factory fused or some magical thing apple does to kill the phone in case you break it. You can just remove the assembly take out the freakin' logic board. Heat the front casing corners and sides with blow dryer or heat gun then just stick a small flat screwdriver between the digitizer and the front casing to seperate them. Then replace it. Put some adhesive before placing it back and that's about it.