Les tutoriels auxquels j'ai contribué
Mes tutoriels favoris
Tutoriels terminés
Mes histoires
Fan stopped spinning up when CPU heat rose, so I replaced it
MacBook Pro 13" Unibody Mid 2009 Fan
MacBook Pro 13" Unibody Mid 2009 Fan
Évènement | Compte | Delta |
---|---|---|
Quelqu'un a utilisé votre tutoriel | 12 | 58 |
Quelqu'un a apprécié votre tutoriel | 5 | 14 |
I'd use a Phillips #000 screwdriver also. The #00 can work, but if the screws are in really tight, it doesn't get far enough down into the screws to get purchase, so it will start to strip (and I agree that the screws are pretty soft). On mine, the screws for the fan were really tight, started to strip with #00, needed a #000 and quite a bit of pressure to get them to move.