Brian

My Macbook pro mid 2012 is dead It does not turn on either on charger or battery or both. No fans, no screen flashes, no nois...

Hi, I got a Macbook Pro 15", Mid 2010. There is something wrong with it. It keeps restarting on its own on cold start even pl...

Hi Everyone. I have a Macbook Air 11" Mid 2013. It is working perfectly except that it won't power on after it was shut down....

I have same problem. My Macbook A1342 Late 2009 turned on but the screen is black. I can see everything on desktop with a fla...

Does anyone have any idea what wrong with my Mac?

Does this apply to Mid 2012 Macbook Pro non-retina?

Hi Sam, I tried to replace the C9560 but I can't find it on my board. Is it N8-DX as in red circle? If not, can you point out where it is? Thanks,

Hey, I did an SMC reset but did not resolve the issue. Then I just reseat the cable from Trackpad to Motherboard. Then it works perfectly now. Power on using power button as normal. I found that there is a small dirt particle at the cable connector at Trackpad. Blow that particle off then issue resolved. Poor Apple Technicians. The owner told me that Technicians did try out a new battery, new Megasafe board and concluded that motherboard needs to be replaced. The original owner decided to sell it to me quite cheap.

I have same problem. My Macbook A1342 Late 2009 turned on but the screen is black. I can see everything on desktop with a flash light. My story are following: The old screen is freezing at some point when starting up. I have to fold/move the screen a bit to get it fully started up. So i thought it is LVDS cable I tried to replace LVDS but nothing changed. It still turned on, took installer disc and made sound like it reading the disc. I still can see things on desktop with a flash light Now it ordered a brand new lcd screen panel. It turned on but black screen. I can see everything on desktop with a flashlight. I did not see apple logo on back of screen light up. Do you know how to fix it?

I have same problem. My Macbook A1342 Late 2009 turned on but the screen is black. I can see everything on desktop with a flash light. My story are following: The old screen is freezing at some point when starting up. I have to fold/move the screen a bit to get it fully started up. So i thought it is LVDS cable I tried to replace LVDS but nothing changed. My bad when i tried to connect wrong end of LVDS. Then my old screen is gone. Nothing show up on screen even with a flash light. It still turned on, took installer disc and made sound like it reading the disc. Now it ordered a brand new lcd screen panel. It turned on but black screen. I can see everything on desktop with a flashlight. I did not see apple logo on back of screen light up. Do you know how to fix it?