Outils recommandés dans ce démontage

Introduction

Here you will see a breakdown of the Apple Studio Display M2454. This will be useful in repairing broken or malfunctioning parts in the future.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Apple Studio Display M2454, utilisez notre manuel de réparation.

Notice that the main components of the monitor are only accessible from the back of the device.
  • Notice that the main components of the monitor are only accessible from the back of the device.

Ajouter un commentaire

Locate the four hex head screws located on the corners of the back panel.
  • Locate the four hex head screws located on the corners of the back panel.

    • Remove the screws with a 2mm hex screwdriver.

Ajouter un commentaire

  • Remove the clear and gray back panels.

Ajouter un commentaire

  • Remove the three screws with #2 phillips head screwdriver.

Ajouter un commentaire

  • To remove the metal panel, push towards the bottom of the monitor to release its clips and pull the panel away.

Ajouter un commentaire

  • Remove screw holding the plastic bracket with #2 Phillips head screwdriver.

Ajouter un commentaire

  • Remove the four screws on the metal bracket.

Ajouter un commentaire

  • Remove the two philips head hold-down screws with the #2 Phillips head screwdriver.

Ajouter un commentaire

  • Remove black connector by pushing the end of the tab closest to the wiring and pulling away from board.

Ajouter un commentaire

  • Remove white connector by lifting tab and pulling away from board.

    • Be careful when lifting tabs, they break easily.

Ajouter un commentaire

  • Remove connector connected to the hold down previously removed simply by pulling with hand.

Ajouter un commentaire

  • Now that the main computer cable is detached, remove it away from monitor.

Ajouter un commentaire

  • Remove the two screws holding the USB port in place with #2 Phillip's head screwdriver.

Ajouter un commentaire

  • Remove the screw on the wire hold down with #2 Phillips head screwdriver.

Ajouter un commentaire

  • Remove white connector connected to LCD main board by lifting tab with tool and pulling away from board.

Ajouter un commentaire

  • The USB port is now detached, remove it from monitor.

Ajouter un commentaire

  • Remove connector on the left bottom corner of the LCD main board by simply pulling with hand.

Ajouter un commentaire

  • Remove the connector on the bottom right corner by 1st removing tape first and pulling with hand.

Ajouter un commentaire

  • Remove top right connector of the LCD main board by pulling with hand.

Ajouter un commentaire

  • Remove the final connector of the LCD main board by pulling with hand.

Ajouter un commentaire

  • Remove the four screws on each corner of the main board with #2 Phillips head screwdriver.

Ajouter un commentaire

  • The board is now detached, remove it from monitor.

Ajouter un commentaire

  • Locate the top and bottom connector on the CCFL inverter and remove it by inserting pin into the small holes and pulling away.

    • This step may be easier with two people.

Ajouter un commentaire

  • Remove the two screws on the top and bottom of the CCFL inverter with #2 Phillips head screwdriver.

Ajouter un commentaire

  • The CCFL inverter is now detached, remove it from monitor.

Ajouter un commentaire

  • You have now successfully taken apart a Apple Studio Display M2454.

Ajouter un commentaire

Dylan Perry

Membre depuis le 20/01/2010

129 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 13-27, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 13-27, Maness Winter 2010

CPSU-MANESS-W10S13G27

4 membres

5 tutoriels rédigés

This model is also known as the Apple Studio Display 15" LCD.

analogcd - Réponse

excellent wee guide......i came here in my search for a replacement stand for this model.

bobby nailen - Réponse

Failing caps were the main problem with this — no air flow.

Mal - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 20

Total : 6,013