Introduction
Les seuls outils nécessaires sont un tournevis cruciforme et un couteau à mastic étroit.
Ce dont vous avez besoin
-
-
-
Avant et arrière du tableau.
-
De gauche à droite sur le devant de la carte, les principales puces sont : LSI FW643E-02 (FIreWire800) ; Broadcom BCM57762 (gige); Intel L150I56 (contrôleur Thunderbolt), NXP LPC1114F (deux), Fresco FL1100 (USB3) ; C-Media CM119A (Audio)
-
De gauche à droite au dos de la carte, les puces principales sont : Parade PS161HDM ; Défilé PS8301 (deux); NXP ZSD310 (deux ); Défilé PS8321. Les puces semblent prendre en charge la conversion HDMI/DVI et le Display Port !
-
Merci à ces traducteurs :
100%
[deleted] nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›
2 commentaires
Hi… someone have the board scheme, please?
My express dock only flashing the Led when I plugged the power cord and turn off
I cannot get any power going into the dock. I was wondering if anyone has had any experience with the analog board and dead power. The cables are hot so I know it must be the dock itself. Just nothing. Its internal leds do not light up and the Ethernet port has no activity lights either.
Any advice would be welcome.